COMBIMASS® Thermal Dispersion Gas Flowmetering
All gas flow meter of COMBIMASS
® series work with thermal dispersion technology and measure directly the gas mass flow respectively gas flow at standard conditions, independent on gas pressure and temperature. Temperature compensation is always automatically included. Every single flow meter gets a calibration in our Binder CAMASS® Calibration Lab. All typical process conditions like as installation situation, flow direction, pressure, temperature and gas composition are considered during calibration. So a high accuracy of flow measurement can be achieved. More information...

COMBIMASS® Flow Conditioning
The patented COMBIMASS
® Flow Conditioner are used in cases, where there is not sufficient inlet and outlet straight pipe run available ( see also DIN ISO 5167-1), to get in all flow situations a fully regular flow profile. Flow profile irregularities and swirls but also flow pulsations and backward influences of later installed components can be reduced and so the measuring accuracy can be significantly improved. More information...

CAMASS® Gas Flow Calibration
When using technologically sophisticated systems to measure and control gases, calibration becomes the decisive factor for success. In order to ensure optimum measuring and control accuracy, each COMBIMASS
® mass flow meter and VACOMASS® air distribution system is precisely calibrated in the CAMASS® Calibration Centre under real operating conditions. More information...

VACOMASS® Distribution System for Aeration Air in Sewage Treatment Plants
VACOMASS® provides - depending upon actual load and oxygen demand - for this air supply meeting its demand in the various basins, zones and/or cascades of the purification plant. VACOMASS® is a modular measuring and monitoring system, consisting of several optimized and coordinated system components for the measurement, control and distribution of aeration air in purification plants. The components can be supplied as an individual construction system. Depending upon plant size, process control strategy and specific requirements, the components of the VACOMASS® system can be used either separately or in combination with one another.
The VACOMASS
® system integration and the precise calibration of the air distribution system in our CAMASS® calibration Lab ensure always an optimum interaction of the system components and thus the highest precision for the control of the air supply.  More information...

COMBIMASS® Gas Analysis
The mobile and stationary gas analysis instruments and systems of the COMBIMASS
® series supplement the gas flow meter as the further component. They are used in sewage gas, in landfill and fermentation gas measurement and analysis. There is however also special equipments like e.g. mobile detectors for the determination of the CO2 concentration for finding hidden persons or animals in final areas such as containers, lorries and cars available. More information...

INSTRUM® Precise Pressure Regulators and
INSTRUM® Tank Blanketing and Inerting Systems

The new high-grade stainless steel precision pressure regulators control the pressure in liquids very stable and precise. They were developed particularly for the high accuracy and stability requirements of modern chemistry and the current process engineering equipment construction as well as for modern engine test stands and are certified also for the employment in highly combustible ranges. They are suitable for all liquid media such as water, acids, caustic solutions, alcohols and solvents of all kinds as well as fuels such as gasoline, Diesel, biodiesel (RME), flight gasoline, methanol, ethanol, gasoline mixtures E5 to E100 and Diesel mixtures B5 to B100.  More information...

Often in containers, reactors, centrifuges or agitating boilers of the process engineering industry, liquids are overlaid with an inert gas atmosphere in order to avoid oxidation or contamination or for explosion protection surely. But depending upon application and requirement various armatures are used with corrosion resistant materials for pressures from 5 mbar to 200 bar.
The high-quality and technically sophisticated INSTRUM systems for tank blanketing, inerting, product transfer and sterilization permit a reduction of the installation and operating cost with improved operation reliability. Fugitive emissions can be reduced. More information...

BETA Pressure and Temperature Switches
There are at present only a few switches available in the industry, which cover such a large area of application as BETA Pressure and temperature switches do. Practically for each branch and industry a high-quality switch can be offered, which will fulfill the required specification.
More information...